Filters
United States (108)
Coolant Systems (7)
Fabricating (6)
Grinding (2)
Inspection (3)
Lathes (2)
Milling (6)
Misc (24)
ABB (5)
ADVANCE LIFTS (1)
AEG MODICON (1)
AERCOLOGY (1)
AIRFLOW SYSTEMS (1)
BALDOR (7)
BISON (3)
BRIDGEPORT (3)
BROWN & SHARPE (1)
BUCK (1)
More…
Sort By
Chevalier 3-Axis CNC VMC, EM-2033L, Fanuc OiM-F Control, 20-HP, 10k RPM, 2 Meg Memory, CAT-40 "Big Plus" Spindle
Vertical Machining CentersStock #: 1304
Used - Excellent
$59,500.00 USD
Chevalier 3-Axis CNC VMC, EM-2033L, Fanuc OiM-F Control, 20-HP, 10k RPM, 2 Meg Memory, CAT-40 "Big Plus" Spindle, AICC High Speed-Machining with 3D Interpolation. 343 Run-Time Hours.
YUASA 12" Horizontal Rotary Table, Model 550-112, 1-Minute Vernier, 1/2" T-Slots, Clamps, 5-1/2" Total Height
Rotary TablesStock #: 1303
Used - Good
$850.00 USD
YUASA 12" Horizontal Rotary Table, Model 550-112, 1-Minute Vernier, 1/2" T-Slots, Clamps, 5-1/2" Total Height
YUASA 8" Indexing Head, Model 550-008, 3-Jaw Chuck, Free Spinning, Indexing & Rotary Handwheel Operation, Horizontal & Vertical
Indexing HeadStock #: 1302
Used - Good
$1,250.00 USD
YUASA 8" Indexing Head, Model 550-008, 3-Jaw Chuck, Free Spinning, Indexing & Rotary Handwheel Operation, Horizontal & Vertical
CUSHMAN 24" Diameter 3-Jaw Heavy Duty Lathe Chuck, A-15 Mount, 8" Thru Hole, Two-Piece Tongue & Groove
ChucksStock #: 1301
Used - Good
$2,950.00 USD
CUSHMAN 24" Diameter 3-Jaw Heavy Duty Lathe Chuck, A-15 Mount, 8" Thru Hole, Two-Piece Tongue & Groove, 6.13" Thick Body, Top Soft Jaws, Approx. 700 Lbs.
CUSHMAN 24" Diameter 3-Jaw Heavy Duty Lathe Chuck, A-15 Mount, 9.5" Thru Hole, Two-Piece Tongue & Groove
ChucksStock #: 1300
Used - Good
$2,750.00 USD
CUSHMAN 24" Diameter 3-Jaw Heavy Duty Lathe Chuck, A-15 Mount, 9.5" Thru Hole, Two-Piece Tongue & Groove, 6.13" Thick Body, Top Soft Jaws, Power Wrench Key, Approx. 700 Lbs.
Sharp 2240NC Flat Bed CNC Teaching Lathe with FAGOR 8055iA Control & Drive System, Conversational, 15-HP, 1,500 RPM
CNC LathesStock #: 1299
Used - Excellent
$65,000.00 USD
Sharp 2240NC Flat Bed CNC Teaching Lathe with FAGOR 8055iA Control & Drive System, Conversational, 15-HP, 1,500 RPM, 8-Position Turret, 12" 3-Jaw Chuck, 3-3/8" Spindle Bore. Excellent Condition.
MITSUBISHI Freqrol-Z220-7.5 kW Inverter, Variable Speed Spindle Controller, 200-230V / 60Hz, 33A Output
Electrical Equipment, CNC Control ComponentsStock #: 1298
Used - Excellent
$1,195.00 USD
MITSUBISHI Freqrol-Z220-7.5 kW Inverter, Variable Speed Spindle Controller, 200-230V / 60Hz, 33A Output
FANUC Servo Amplifier, Model A06B-6058-H223, As Taken From Running Machine
Servo DrivesStock #: 1297
Used - Excellent
$1,495.00 USD
FANUC Servo Amplifier, Model A06B-6058-H223, As Taken From Running Machine
IRIS POWER EL CID EVOLUTION ELECTROMAGNETIC CORE IMPERFECTION DETECTION - Offline Testing of Stator Core Inter-Laminar Insulation - NEW - NEVER USED
Inspection & Measuring, MeasuringStock #: 1296
New - In-Stock
$69,500.00 USD
IRIS POWERR EVOLUTION EL CID ELECTROMAGNETIC CORE IMPERFECTION DETECTION - Offline Testing of Stator Core Inter-Laminar Insulation. Electromagnetic Core Imperfection Detection (EL CID) testing is ...
ABB 6-Axis CNC Robot, IRB4400, M2000, New 2005, ABB S4CPLUS Control with Teach Pendant
RobotsStock #: 1295
Used - Good
ABB 6-Axis CNC Robot, IRB4400, M2000, New 2005, ABB S4CPLUS Control with Teach Pendant
Dynabrade Versatility Grinder, M/N 65036 Virtubrade, 1/4" - 2" Wide Belt Cap., 1-HP Vari-Speed, 115 Volt, 1-PH, Very Good
Grinder BeltStock #: 1294
Used - Good
$3,450.00 USD
Dynabrade Versatility Grinder, M/N 65036 Virtubrade, 1/4" - 2" Wide Belt Cap., 1-HP Vari-Speed, 115 V, 1-PH, Very Good Running Condition.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, with Soft Jaws, 18-1/2" x 9" x 4-1/2" High, 75 Lbs.
VisesStock #: 1293
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, with Soft Jaws,18-1/2" x 9" x 4-1/2" High, 75 Lbs.
Kurt 6" Machine Vise, Model D675, 6" Wide Jaws, 6-3/4" Max. Opening with Jaws, 18-1/2" x 9" x 5" High, 74 Lbs.
VisesStock #: 1292
Used - Good
$475.00 USD
Kurt 6" Machine Vise, Model D675, 6" Wide Jaws, 6-3/4" Max. Opening with Jaws, 18-1/2" x 9" x 5" High, 74 Lbs.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, with Soft Jaws, 18-1/2" x 9" x 4-1/2" High, 70 Lbs.
VisesStock #: 1291
Used - Good
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, 18-1/2" x 9" x 4-1/2" High, 70 Lbs.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, 18-1/2" x 9" x 4-1/2" High, 60 Lbs.
VisesStock #: 1290
Used - Good
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, 18-1/2" x 9" x 4-1/2" High, 60 Lbs.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, with Jaws, 18-1/2" x 9" x 4-1/2" High, 70 Lbs.
VisesStock #: 1289
Used - Good
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, with Jaws, 18-1/2" x 9" x 4-1/2" High, 70 Lbs.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, with Jaws & Handle, 18-1/2" x 9" x 4-1/2" High, 73 Lbs.
VisesStock #: 1288
Used - Good
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, with Jaws & Handle, 18-1/2" x 9" x 4-1/2" High, 73 Lbs.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, 18-1/2" x 9" x 4-1/2" High, 64 Lbs.
VisesStock #: 1287
Used - Good
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, 18-1/2" x 9" x 4-1/2" High, 64 Lbs.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, 18-1/2" x 9" x 4-1/2" High, 64 Lbs.
VisesStock #: 1286
Used - Good
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening, 18-1/2" x 9" x 4-1/2" High, 64 Lbs.
Kurt 6" Machine Vise, Model D675, 6" Wide Jaws, 6-3/4" Max. Opening with Jaws, 18-1/2" x 9" x 5" High, 74 Lbs.
VisesStock #: 1285
Used - Excellent
$475.00 USD
Kurt 6" Machine Vise, Model D675, 6" Wide Jaws, 6-3/4" Max. Opening with Jaws, 18-1/2" x 9" x 5" High, 74 Lbs.
Kurt 6" Machine Vise, Model D675, 6" Wide Jaws, 6-3/4" Max. Opening with Jaws, 18-1/2" x 9" x 5" High, 74 Lbs.
VisesStock #: 1284
Used - Good
$375.00 USD
Kurt 6" Machine Vise, Model D675, 6" Wide Jaws, 6-3/4" Max. Opening with Jaws, 18-1/2" x 9" x 5" High, 74 Lbs.
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening with Jaws, 18-1/2" x 9" x 4-1/2" High, 73 Lbs.
VisesStock #: 1283
Used - Good
$325.00 USD
Kurt 6" Machine Vise, Model D60, 6" Wide Jaws, 6" Jaw Opening with Jaws, 18-1/2" x 9" x 4-1/2" High, 73 Lbs.
Kurt 6" Machine Vise with Swivel Base, Handle, 6" Jaw Width, 7-1/2" Opening, 1-3/4" Jaw Height, 95 Lbs.
VisesStock #: 1282
Used - Good
$425.00 USD
Kurt 6" Machine Vise with Swivel Base, Handle, 6" Jaw Width, 7-1/2" Opening, 1-3/4" Jaw Height, 95 Lbs.
6" Machine Vise with Swivel Base and Handle, 6" Jaw Width, 6" Jaw Opening, 1-3/4" Jaw Height, 85 Lbs.
VisesStock #: 1281
Used - Good
$285.00 USD
6" Machine Vise with Swivel Base and Handle, 6" Jaw Width, 6" Jaw Opening, 1-3/4" Jaw Height, 85 Lbs.
Yuasa 8" Heavy Duty Milling Machine Vise with Swivel Base and Handle
VisesStock #: 1280
Used - Good
$975.00 USD
Yuasa 8" Heavy Duty Milling Machine Vise with Swivel Base and Handle
Kurt 8" AngLock Heavy Duty Machine Vise, 8" Wide Jaws, 7.5" Opening, 2" Jaw Height, 144 Lbs., Nice!
VisesStock #: 1279
Used - Good
$795.00 USD
Kurt 8" AngLock Heavy Duty Machine Vise, 8" Wide Jaws, 7.5" Opening, 2" Jaw Height, 144 Lbs., Nice!
Kurt 8" AngLock Heavy Duty Machine Vise, 8" Wide Jaws, 7.5" Opening, 2" Jaw Height, 144 Lbs., Nice!
VisesStock #: 1278
$795.00 USD
Kurt 8" AngLock Heavy Duty Machine Vise, 8" Wide Jaws, 7.5" Opening, 2" Jaw Height, 144 Lbs., Nice!
Bridgeport No. 3 Right Angle Milling Attachment with Stub Arbor, R8, Original Paint
Milling Attachments & HeadsStock #: 1277
Used - Good
$695.00 USD
Bridgeport No. 3 Right Angle Milling Attachment with Stub Arbor, R8, Original Paint
Bridgeport No. 3 Right Angle Milling Attachment with Stub Arbor, R8, All New Bearings!
Milling Attachments & HeadsStock #: 1276
Used - Good
$695.00 USD
Bridgeport No. 3 Right Angle Milling Attachment with Stub Arbor, R8, All New Bearings!
Bridgeport Series I 2-HP Vertical Mill, 1979, 9" x 42" Table, Anilam 2-Axis DRO, Power Table Feed, Chrome Ways, Kurt Vise
Millers, VerticalStock #: 1273
Used - Good
$6,950.00 USD
1979 Bridgeport Series I, 2-HP Vertical Mill, 9" x 42" Table, Anilam 2-Axis DRO, Power Longitudinal Table Feed, Chrome Ways, Bijur Lube, R8 Spindle, Collets, Kurt D675 Vise